can can?
cliff
Posted 2009-01-15 2:55 PM (#433421)
Subject: can can?


Joined:
March 2002
Posts: 14842

Location: NJ		What are the other preamps that can fit into the same can as the VIP??
Top of the page Bottom of the page
Jeff W.
Posted 2009-01-15 3:30 PM (#433422 - in reply to #433421)
Subject: Re: can can?


Joined:
November 2003
Posts: 11039

Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub		I just looked back at some older posts on the topic - and reputable sources tell us the Studio and OpPro will fit the VIP.
Top of the page Bottom of the page
stephent28
Posted 2009-01-15 3:50 PM (#433423 - in reply to #433421)
Subject: Re: can can?



Joined:
April 2004
Posts: 13303

Location: Latitude 39.56819, Longitude -105.080066		I have personally swapped the Studio with the VIP.

No problems.
Top of the page Bottom of the page
John B
Posted 2009-01-15 3:59 PM (#433424 - in reply to #433421)
Subject: Re: can can?


Joined:
January 2004
Posts: 1225

Location: Lake Hiawatha, New Jersey		I can lend you an OP-Pro if you wanna take it for a "test drive".
Top of the page Bottom of the page
Weaser P
Posted 2009-01-15 4:23 PM (#433425 - in reply to #433421)
Subject: Re: can can?


Joined:
October 2005
Posts: 5331

Location: Cicero, NY		I think the real question is exactly when did we pick up reputable sources?
Top of the page Bottom of the page
Auriemma
Posted 2009-01-15 4:36 PM (#433426 - in reply to #433421)
Subject: Re: can can?



Joined:
October 2008
Posts: 639

Location: NW of Philadelphia		I believe also the OP-30, 40, 50, and iDea will as well.
Top of the page Bottom of the page
FlySig
Posted 2009-01-15 5:02 PM (#433427 - in reply to #433421)
Subject: Re: can can?



Joined:
October 2005
Posts: 4063

Location: Utah		VIP, OpPro, and OpPro Studio have all worked for me in the same can. The Op 30 did NOT due to a slightly different connector in the bottom of the preamp and can.

Let me correct that to say that the copper tabs inside the connectors are staggered differently in the OP30, so I was afraid of shorting something out by putting it in an OpPro can. Maybe it would work, but I ain't taking the chance of burning it out.
Top of the page Bottom of the page
Gallerinski
Posted 2009-01-15 8:17 PM (#433428 - in reply to #433421)
Subject: Re: can can?
Joined:
May 2008
Posts: 4996

Location: Phoenix AZ		I've used OP50, OPPro, OPPro Studio, VIP and iDEA all in the same can.
Top of the page Bottom of the page
schroeder
Posted 2009-01-16 1:10 PM (#433429 - in reply to #433421)
Subject: Re: can can?


Joined:
November 2004
Posts: 4413

You guys seem to spend all your lives in and out of the can.
Top of the page Bottom of the page
Weaser P
Posted 2009-01-16 1:16 PM (#433430 - in reply to #433421)
Subject: Re: can can?


Joined:
October 2005
Posts: 5331

Location: Cicero, NY		Toby likes to take long runs.
Top of the page Bottom of the page
cliff
Posted 2009-01-16 1:17 PM (#433431 - in reply to #433421)
Subject: Re: can can?


Joined:
March 2002
Posts: 14842

Location: NJ		Dave,

Whaddaya' like/dislike between the OpPro & the Studio?? . . .
Top of the page Bottom of the page
schroeder
Posted 2009-01-16 1:23 PM (#433432 - in reply to #433421)
Subject: Re: can can?


Joined:
November 2004
Posts: 4413

I can't believe cliff is trying to pull this out of the can and back on topic. Has the world started spinning in reverse?
Top of the page Bottom of the page
John B
Posted 2009-01-16 1:55 PM (#433433 - in reply to #433421)
Subject: Re: can can?


Joined:
January 2004
Posts: 1225

Location: Lake Hiawatha, New Jersey
Originally posted by schroeder:
I can't believe cliff is trying to pull this out of the can and back on topic. Has the world started spinning in reverse?
That's because he's got something in his can that he's not sure that he likes .....
Top of the page Bottom of the page
cliff
Posted 2009-01-16 1:59 PM (#433434 - in reply to #433421)
Subject: Re: can can?


Joined:
March 2002
Posts: 14842

Location: NJ		ShutUpWitko!!
Top of the page Bottom of the page