Tone pot kills volume
sycamore
Posted 2019-08-18 6:04 AM (#549624)
Subject: Tone pot kills volume


Joined:
March 2007
Posts: 698

Location: Cork, Ireland		I needed to change the pots on my DIY guitar as they had got noisy. It has two P90's with a 3-way switch, one volume and one tone pot. I decided to go from 250k to 500k pots but this means the tone-pot really kills the volume when its in the lower half of its range. In fact the 250k also did this but with the 500k, its worse. Any ideas?
Schematic to follow shortly
Top of the page Bottom of the page
sycamore
Posted 2019-08-18 6:13 AM (#549625 - in reply to #549624)
Subject: RE: Tone pot kills volume


Joined:
March 2007
Posts: 698

Location: Cork, Ireland		https://imgur.com/sogw2zM
Top of the page Bottom of the page
Mr. Ovation
Posted 2019-08-19 2:22 AM (#549637 - in reply to #549624)
Subject: RE: Tone pot kills volume


Joined:
December 2001
Posts: 7210

Location: The Great Pacific Northwest

Your potentiometer is in the wrong place.

 

Top of the page Bottom of the page
sycamore
Posted 2019-08-21 1:02 PM (#549659 - in reply to #549624)
Subject: Re: Tone pot kills volume


Joined:
March 2007
Posts: 698

Location: Cork, Ireland		Oops, schoolboy error! That did improve it but still reduces volume at low tone settings. Do I need to change pot taper, resistance, or capacitor?
Top of the page Bottom of the page