|
|
Joined:
February 2003
Posts: 2
| Just picked up a new 1861 Balladeer and the action height sits at 3/32 at both E strings....I'd like to get the treble end down to about 2/32; if I remove one shim from under the saddle will it lower both sides by the same amount?
Also, is it a problem getting to the shims with all the pickup wiring, etc. there?
Thanks. |
|
| |
|
Joined:
October 2002
Posts: 61
| check with service There use to be tapered shims .Don't know if still used .pick-up assy lifts right out should'nt be a problem. |
|
| |
|
Joined:
December 2002
Posts: 6
Location: Australia | I dropped one shim from my elite special and it was "easy as" The pickup is right at the bottom and totally seperate. |
|
| |
Action height
