|
|
Joined:
February 2004
Posts: 1634
Location: Warren,Pa. | Working on a Std. Baladeer for a friend, and the rosette's loose. What adhesive should I use to re-attach?
John <>{ |
|
| |
|
Joined:
August 2004
Posts: 709
Location: Germany | Superglue didn't work so I used a two-component adhesive gluing a loose rosette on my Custom Legend. Worked like a charm.
Karl |
|
| |
|
Joined:
December 2003
Posts: 1071
Location: Carle Place, NY | Even though it would work very well, I wouldn't use two-part epoxy because it is permanent. I've had good results with super glue. |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | I would contact the service department and ask them what THEY use. You're probably not going to get a better answer than that.
Dave |
|
| |
|
Joined:
February 2004
Posts: 1634
Location: Warren,Pa. | The word from Kim:
"Just use a 5 min. epoxy and clean the excess with alcohol." |
|
| |
gluing down rosette
