|
|
Joined:
November 2002
Posts: 3664
Location: Pacific Northwest Inland Empire | OK, hopefully, a simple question: What type of wood is the center strip in the lamination? Not quite mahogany, and not dark enough for maple, either. |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | chris,are you talking baout the older wide stripe necks?? jason |
|
| |
|
Joined:
April 2006
Posts: 1138
Location: CT | Either mahogany (the dark one), or maple cut cross-grained (a little darker than the other stripes, but become a similar shade at the curve of the neck heel. |
|
| |
|
Joined:
March 2002
Posts: 14842
Location: NJ | Mahogany. |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | And sometimes it was mahogony. |
|
| |
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | Mahogany. |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | occasionally mahogony |
|
| |
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | Mahogany now and then. |
|
| |
|
Joined:
November 2002
Posts: 3664
Location: Pacific Northwest Inland Empire | OK, that's a concensus & quarrel- oops, I mean quorum.
Now, the reason I ask, and yes, I need more medication, is that I am attempting to reproduce the peghead on an old 1615-4.
BTW, does anybody out there have a detailed, measured diagram of the peghead? I could probably fake it, but having the factory specs would be good, too!
Remember, this is The Merry Troll of the BFLG."Don't do anything easy, and love every minute!" |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | seesquare - I'm trying something similar - to add the skunk stripes to an existing solidbody neck. I'm not trying to copy it exactly, but it's going to be a bear. I got the wood binding strips from stewmac. The hard part will be routing out the channel from the curved neck. |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | mahog-maple-mahog-maple-mahog....chris,ive got a pacemaker head here some damn where. if i can find it will send it to you...jason |
|
| |
|
Joined:
November 2002
Posts: 3664
Location: Pacific Northwest Inland Empire | Much appreciated! I will be sending the electronics, probably Friday. |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | thanks chris. ill get your preamp repaired or replaced soon as i get them and send your new one out all togehter to save on the shipping...jason |
|
| |
|
Joined:
May 2003
Posts: 4389
Location: Capital District, NY, USA Minor Outlying Islands | Not to be confused with the mahogany, maple, ebony, maple, mahogany strip found on others. |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | rick,its a 70's pacemaker. im pretty sure that those older ones except the 3 peice adamas necks were mahog-maple-mahog-maple-mahog...jason |
|
| |
|
Joined:
May 2003
Posts: 4389
Location: Capital District, NY, USA Minor Outlying Islands | Jason,
You're right, I was thinking adamas.
Actually, my 1976 CA has a mahogany, maple, (and I believe it to be) maple center stripe, maple, mahogany. It's really pretty. |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | Doing inlay down the back might be pretty hard. How about just putting it on the road and let them paint lines down it?
Seriously it's probably best to build it from scratch so you get the benefit of the strength ot the laminates.
Also somewhere in the back of my mind there's a bell that's ringing and it says that some of the center stripes were also maple, just set 90* to the other two plys of maple. Gives you added strength. |
|
| |
|
Joined:
August 2002
Posts: 8307
Location: Tennessee | I've seen some collectors that had different woods ... I remember seeing ebony as a center stripe and I think the 94 had something exotic, maybe called purpleheart? |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | Sharpie |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | Pick Your Color :p |
|
| |
|
Joined:
October 2006
Posts: 51
Location: Arizona | Originally posted by Old Man Arthur:
Sharpie Those tape pinstripe rolls that you used to see at the auto part stores might work as well... |
|
| |
5-piece neck components
