|
|
Joined:
August 2008
Posts: 9
| I replaced my 9V battery on my Balladeer preamp/tuner and it didn't seat right and now is jammed. I can't seem to pry it lose. Any suggestions? I appreciate it....Merry Christmas |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Which PA is it?
Is this the same Balladeer you had issues with before?
<Hold on a while, help is on the way... > |
|
| |
|
Joined:
August 2008
Posts: 9
| Yes. Seems a little snake bitten. |
|
| |
|
Joined:
August 2008
Posts: 9
| Its an Ovation op Pro Pre Amp |
|
| |
|
Joined:
February 2005
Posts: 11840
Location: closely held secret | Try gently pressing down on it at both ends and wiggling it to see if it will set properly. If not, try inserting a thin blade between the end with the release button and the can, and gently pry up on it.
Gently. |
|
| |
|
Joined:
August 2008
Posts: 9
| Thanks PB...I'll give it a try |
|
| |
|
Joined:
August 2008
Posts: 9
| did it! Thanks...I need to be more carefull when reseating it. :)
Merry Xmas to you and your family |
|
| |
|
Joined:
February 2005
Posts: 11840
Location: closely held secret | Same to you. |
|
| |
|
Joined:
February 2008
Posts: 247
Location: Delaware | If you manage to get it out try loosining the screws that hold the can (pick up holder) in a little bit, I had one that was troublesome getting out and a little counterclockwise twist of the can mounting screws did the trick. Good luck! |
|
| |
Pre Amp/tuner is stuck! :(
