|
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Yes, I did several searches and couldn't find any answers...
Has anyone had a broken headstock 'ear' repaired/replaced at the MS?
I have an old CC57 that has about 1/2" missing off the bass side of the headstock. I'd include a pic but the git is in temp storage during our den remodeling 'experience'.
I really don't like the Vincent van Gogh look...
TIA! |
|
| |
|
Joined:
March 2002
Posts: 14842
Location: NJ | s'that a Celebrity??
They don' work on Celebs . . . |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | I had one repaired by a local luthier and he did a nice job. He milled a section of mahogany and spliced it in perfectly and refinished it. You had to look real hard to see it. Cost me $125. which I thought was pretty reasonable for amunt of work he did.
I'm not sure about your CC57. That's handled by Kaman Service, not Ovation. I think they do warranty work only, no out of warranty repairs or custom work. You could call and ask.
Dave |
|
| |
|
Joined:
March 2007
Posts: 665
Location: Tychy, Poland | i had it repaired by my luthier. it's visible, but looks better repaired than not. As in Tupperware's case, he just milled section of mahogany and glued it to headstock. |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | I didn't even think of the Kaman/Ovation diff!
Maybe it would be easier if I get a used headstock, sever along the thicker 'shovel' arch and splice.
Thanx for the info and food for thought gents!  |
|
| |
|
Joined:
March 2005
Posts: 12759
Location: Boise, Idaho | One of these days I'm going to try it myself on my Country Artist. I've got some mahogany, but I've been using it to put the guitar hangers on. |
|
| |
Headstock 'Ear' Repair?
