|
|
Joined:
January 2007
Posts: 146
Location: Japan | I have a buzzing coming from my Adamas and as near as I can tell it stops if I push down on the saddle.
Has anyone any advice to help me out before tomorrow night that I can do myself?
I'm still in Japan and this guitar stays here all year when I go back to Alaska. |
|
| |
|
Joined:
October 2006
Posts: 5575
Location: big island | my 1581 had a buzz coming from the same area. i found that it was the treble side post at the end of the saddle, vibrating in its hole. i lifted it up and placed a small piece of electrical tape around the post causing it to fit more snug. no more buzz. |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | Man, I hate to say this, but one of mine had a couple of loose braces, and I had to send it back to the factory for them to reglue them. Hope it's not that. |
|
| |
|
Joined:
October 2006
Posts: 5575
Location: big island | was that an adamas, jim? |
|
| |
|
Joined:
January 2007
Posts: 146
Location: Japan | Originally posted by lanaki:
my 1581 had a buzz coming from the same area. i found that it was the treble side post at the end of the saddle, vibrating in its hole. i lifted it up and placed a small piece of electrical tape around the post causing it to fit more snug. no more buzz. This sounds like what I'm having right now, all the way down to which side it appears to be coming from, except that this particular guitar has the thinline pickup with no posts.
I'm tempted to try wedging some paper in between the saddle and bridge to see if it makes any difference. |
|
| |
|
Joined:
March 2005
Posts: 12754
Location: Boise, Idaho | I've also had a buzz from a cracked brace right under the end of the saddle. A little Elmer's fixed it. |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | Originally posted by lanaki:
was that an adamas, jim? Yup. Thats the only reason I didn't want to try and fix it myself. I really don't know what type of glue they use on carbon fiber. |
|
| |
|
Joined:
January 2007
Posts: 146
Location: Japan | Originally posted by Trader Jim:
Originally posted by lanaki:
was that an adamas, jim? Yup. Thats the only reason I didn't want to try and fix it myself. I really don't know what type of glue they use on carbon fiber.
The second time around it pulled up carbon fibers with it too and now looks really horrible, although it still sounds/plays great... :confused: |
|
| |
|
Joined:
January 2007
Posts: 146
Location: Japan | Well it was buzzing today on and off while I was practicing, but I never noticed it tonight on the gig.
Maybe I'll bring it back to Alaska with me and swap it with another one I have, then I can send it in for an exam, or sell it as is... |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | You should be able to check the braces fairly easily through the rear "hatch". Just try to gently move each brace sideways at both ends. If you have a loose one, it will show up right away. |
|
| |
|
Joined:
January 2007
Posts: 146
Location: Japan | Jim, thanks.
I'll try that tomorrow or the next day when I get back to where my guitar is.
That'd be great if it's an easy fix and I guess it actually wouldn't surprise me, since it just started recently. |
|
| |
Buzzing sound on my Adamas!
