The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )
NEW in 2026 Searches both the Ovation FanClub and Ovation Tribute websites

Random quote: "Ovation Guitars really don't get the respect they deserve!" - Alex Pepiak



Jump to page : 1
Now viewing page 1 [25 messages per page]
Getting inside without a manhole

View previous thread :: View next thread
   Members Forums -> General PostingMessage format
 
TAFKAR
Posted 2009-08-09 11:18 PM (#404018)
Subject: Getting inside without a manhole



Joined:
April 2008
Posts: 2985

Location: Sydney, Australia		Some people on this list wonder how you get inside an adamas/elite that doesn't have a manhole cover. Here's how:

I was minding my own business, happily playing my guitar (and no, it wasn't over my head) which I noticed a resonating buzzing from within my beloved 08C.

Taking out the can I discovered that the cable tie, that stops the cables from bouncing around inside the guitar, had unstuck from the bowl.

Fairly simple, I just need to glue it back down.

Herein lies the dilemma. I can get my hand inside the can, but then I can't see anything. Even without my hand in the way, I still can't see.

Solution part 1: itty bitty book light. Just stick it through the soundholes and there is light:


Then I grabbed one of those flexible tools for getting things that have fallen into small spaces and used that to guide the cable tie to the right place.

Add some glue, hold it in place for five minutes... Now just to wait a few hours to check it holds and put it all back together
Top of the page Bottom of the page
Old Man Arthur
Posted 2009-08-09 11:22 PM (#404019 - in reply to #404018)
Subject: Re: Getting inside without a manhole



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR		Where there's a Will, there's a Way!

Thanks for the tip!
Top of the page Bottom of the page
Trader Jim
Posted 2009-08-10 2:19 PM (#404020 - in reply to #404018)
Subject: Re: Getting inside without a manhole


Joined:
June 2006
Posts: 7307

Location: South of most, North of few		A 6" hole saw works too. ;)
Top of the page Bottom of the page
Gallerinski
Posted 2009-08-10 5:13 PM (#404021 - in reply to #404018)
Subject: Re: Getting inside without a manhole
Joined:
May 2008
Posts: 4996

Location: Phoenix AZ		You should try working on a 47 reissue.
Top of the page Bottom of the page
Trader Jim
Posted 2009-08-10 9:51 PM (#404022 - in reply to #404018)
Subject: Re: Getting inside without a manhole


Joined:
June 2006
Posts: 7307

Location: South of most, North of few		THEN, you need the hole saw.
Top of the page Bottom of the page
TAFKAR
Posted 2009-08-11 9:03 AM (#404023 - in reply to #404018)
Subject: Re: Getting inside without a manhole



Joined:
April 2008
Posts: 2985

Location: Sydney, Australia		But there's nothing but air inside the #47, so why would you need to get inside?
Top of the page Bottom of the page
Old Man Arthur
Posted 2009-08-11 9:16 AM (#404024 - in reply to #404018)
Subject: Re: Getting inside without a manhole



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR		Why do men tinker with their car engines when there is nothing wrong with them (yet)?
Top of the page Bottom of the page
MWoody
Posted 2009-08-11 11:48 AM (#404025 - in reply to #404018)
Subject: Re: Getting inside without a manhole



Joined:
December 2003
Posts: 13996

Location: Upper Left USA		Good BFLG documentary Richard!

I took the easy way out on this 1115:

Top of the page Bottom of the page
CrimsonLake
Posted 2009-08-11 3:28 PM (#404026 - in reply to #404018)
Subject: Re: Getting inside without a manhole


Joined:
August 2006
Posts: 3145

Location: Marlton, NJ
Originally posted by Gallerinski:
You should try working on a 47 reissue.
*gasp*
Top of the page Bottom of the page
Nick B.
Posted 2009-12-16 5:04 PM (#404027 - in reply to #404018)
Subject: Re: Getting inside without a manhole



Joined:
December 2009
Posts: 686

Location: Route 66, just east of the Cadillac Ranch		Tafkar,
I just wanted to say thanks for this post. My 08C arrived yesterday from Al and had a buzz emanating from the body. A quick search pointed me to this thread. Armed with the information and pictures you shared here, I pulled out the electronics to discover the cable clip was still attached to the side of the bowl, but the audio cable had slipped out. I guided the cable back in the clip and snapped the clip shut. Voila! No more buzz. Thanks again for the tech tip.
Nick
Top of the page Bottom of the page
CanterburyStrings
Posted 2009-12-16 5:19 PM (#404028 - in reply to #404018)
Subject: Re: Getting inside without a manhole


Joined:
March 2008
Posts: 2683

Location: Hot Springs, S.D.		Isn't this place great?!!
Top of the page Bottom of the page
cholloway
Posted 2009-12-16 5:40 PM (#404029 - in reply to #404018)
Subject: Re: Getting inside without a manhole


Joined:
March 2005
Posts: 2793

Location: Atlanta, GA.
Originally posted by Trader Jim:
A 6" hole saw works too. ;)
This is the thing Ovation Review calls a round drill attachment. :cool:
Top of the page Bottom of the page
WillaMuse
Posted 2009-12-16 11:37 PM (#404030 - in reply to #404018)
Subject: Re: Getting inside without a manhole



Joined:
May 2009
Posts: 1433

Location: Right now?		:eek:
Then I grabbed one of those flexible tools for getting things that have fallen into small spaces


That thing is cool. Where can I get one? Tafkar, I'm glad you were able to fix it so easily.

Nick: Congratulations on your wonderful new guitar!

;)
Willa
Top of the page Bottom of the page
Old Man Arthur
Posted 2009-12-16 11:56 PM (#404031 - in reply to #404018)
Subject: Re: Getting inside without a manhole



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR		Go to the tool section of Lowe's or Home Desperate...


Here\'s something like it...
Top of the page Bottom of the page
2ifbyC
Posted 2009-12-16 11:59 PM (#404032 - in reply to #404018)
Subject: Re: Getting inside without a manhole
Joined:
December 2006
Posts: 6268

Location: Florida Central Gulf Coast
Originally posted by WillaMuse:
Where can I get one?
SEARS has 'em. Some hardware stores might have 'em also.

OK, 'Quick Draw' Arthur, ya beat me on that one!
Top of the page Bottom of the page
Nick B.
Posted 2009-12-17 12:03 AM (#404033 - in reply to #404018)
Subject: Re: Getting inside without a manhole



Joined:
December 2009
Posts: 686

Location: Route 66, just east of the Cadillac Ranch
Originally posted by WillaMuse:
Nick: Congratulations on your wonderful new guitar!

;)
Willa
Thanks Willa. You can expect a full report a bit later. Right now I'm overwhelmed by the sound, the feel, and the looks of my new guitar. If I wrote anything about it now I'd just embarrass myself. ;)
Nick
Top of the page Bottom of the page
Old Man Arthur
Posted 2009-12-17 12:15 AM (#404034 - in reply to #404018)
Subject: Re: Getting inside without a manhole



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR
Originally posted by 2ifbyC:
Originally posted by WillaMuse:
Where can I get one?
SEARS has 'em. Some hardware stores might have 'em also.

OK, 'Quick Draw' Arthur, ya beat me on that one!
I may have beat you to it, but yours is better.
Anyone who wants one should get the Craftsman.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)