|
|
Joined:
September 2013
Posts: 3
| Greetings. I am still looking for recommendations ... I have an old Balladeer 1112, it has a piezo under saddle wired directly to the output jack. (No preamp).
Can I add a volume control to this... If so, what control would work and what wiring schematic do I need!
Thanks
Doug |
|
| |
|
Joined:
December 2006
Posts: 6995
Location: Jet City | Doug, welcome.
I've upgraded your membership so you can go ask in the main section. This "Welcome Center" only has a few people able allowed to respond, so you'll have a better response there. |
|
| |
|
Joined:
September 2013
Posts: 3
| Well I did add a volume control, except not to the guitar. I soldered a potentiometer in line to a guitar cable. It works, and without having to drill a hole for the vol control into the bowl of the Balladeer. The I noticed Taylor sells one ($60) on M F. A little price, but same effect. |
|
| |
|
Joined:
December 2006
Posts: 6995
Location: Jet City | Yes, I have something similar by Fishman with the addition of EQ. Glad you figured out your solution. |
|
| |
Adding a volume control
