The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "Jazz... isn't that just a series of mistakes disguised as musical composition?” - David St. Hubbins of Spinal Tap



Jump to page : 1
Now viewing page 1 [25 messages per page]
'97C preamp failed

View previous thread :: View next thread
   Members Forums -> General PostingMessage format
 
FlySig
Posted 2018-11-15 5:48 PM (#545833)
Subject: '97C preamp failed



Joined:
October 2005
Posts: 4025

Location: Utah
The preamp in my '97C is inop. I've been able to verify the pickup works and that there is some continuity to the output jack and power to the output circuit. There's a problem somewhere between the jack for the pickup and the last stage of electronics before the output jack. I can plug the power into the board and get a thump out to the amp, but there's no audio from the pickup. Running the pickup direct to the amp does work. I tried another pickup plugged in but no joy there either (yes that pickup is verified good).

The touch-control volume circuit would be my first guess. I don't have the right kind of equipment to really troubleshoot this, like an oscilloscope. I've jiggled all the connectors and wiring with no luck.

Has anybody pulled out the touch control circuit board and messed with it or found simple fixes?

The last owner said it worked the last time he tried it. Since I've had it, nada.
Top of the page Bottom of the page
bburg
Posted 2018-11-16 9:52 AM (#545845 - in reply to #545833)
Subject: Re: '97C preamp failed



Joined:
August 2009
Posts: 1137

Location: Germany, where delicious wine is growing (Rheinh)
Bad news! Did you change the battery?

Bernie
Top of the page Bottom of the page
FlySig
Posted 2018-11-16 1:53 PM (#545849 - in reply to #545845)
Subject: Re: '97C preamp failed



Joined:
October 2005
Posts: 4025

Location: Utah
bburg - 2018-11-16 8:52 AM

Bad news! Did you change the battery?

Bernie


Yes, twice! And tongue-tested the battery.
Top of the page Bottom of the page
DanSavage
Posted 2018-11-16 5:36 PM (#545856 - in reply to #545833)
Subject: Re: '97C preamp failed



Joined:
June 2012
Posts: 2303

Location: Lake Forest, CA
This may or may not help.

I've got an OP-Pro on my bench that I'm going to attempt to fix. Visual inspection of the circuit board revealed a couple of cold solder joints that need to be fixed.

So, you might try looking at the circuit board for any broken/cold solder joints.
Top of the page Bottom of the page
nerdydave
Posted 2018-11-16 5:53 PM (#545857 - in reply to #545833)
Subject: Re: '97C preamp failed


Joined:
August 2011
Posts: 887

Location: Always beautiful canyon country of Utah
Tongue testing not necessarily indicative of available voltage. Voltmeter much better. Particularly because these units are sometimes fussy as to what voltage they will accept and still function appropriately!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)