The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "I've always felt that blues, rock 'n' roll and country are just about a beat apart."-Waylon Jennings



Jump to page : 12
Now viewing page 1 [25 messages per page]
Applause refinish

View previous thread :: View next thread
   Member Communities -> Bottom Feeding Luthiery GuildMessage format
 
slodoug
Posted 2020-09-14 11:53 AM (#552849)
Subject: Applause refinish


Joined:
September 2020
Posts: 23

Not sure how this is going to progress, I've already sanded some of the top and the high spots look like they are showing the bracing under top. I know the top is a cheap laminate. Not looking for a good wood look although i considered a veneer on top. Probably would go gloss or matte black after a ton of filler. Any thoughts?

Top of the page Bottom of the page
seesquare
Posted 2020-09-14 6:15 PM (#552851 - in reply to #552849)
Subject: Re: Applause refinish


Joined:
November 2002
Posts: 3598

Location: Pacific Northwest Inland Empire
As long as it plays decently, cosmetics be damned! Shoot some stain on the top to even it out, a couple of clearcoats, and string it up. Suppose you could get creative with a rosette, if the original has eloped.
Top of the page Bottom of the page
slodoug
Posted 2020-09-14 9:54 PM (#552852 - in reply to #552849)
Subject: Re: Applause refinish


Joined:
September 2020
Posts: 23

the original rosette was attached to the pickguard. shows you how the cheap models were made.
Top of the page Bottom of the page
seesquare
Posted 2020-09-15 6:35 AM (#552856 - in reply to #552849)
Subject: Re: Applause refinish


Joined:
November 2002
Posts: 3598

Location: Pacific Northwest Inland Empire
Cheap may be a bit harsh. Entry-level maybe, or inexpensive, as compared with the de rigueur product line. Applesauce models played pretty well, generally. Then, there's that aluminum neck........good excuse to learn slide guitar.
Top of the page Bottom of the page
slodoug
Posted 2020-09-15 10:13 AM (#552857 - in reply to #552849)
Subject: Re: Applause refinish


Joined:
September 2020
Posts: 23

I've owned this one since i was 13 (52 now). played it a lot in my stepdads bluegrass band back them. I punched a hole in the back when i fell on it last year thus the inner epoxy resin you can see. I'm just worried about sanding it too much and not being able to get a flat area.
Top of the page Bottom of the page
slodoug
Posted 2020-09-20 8:19 PM (#552899 - in reply to #552849)
Subject: Re: Applause refinish


Joined:
September 2020
Posts: 23

gonna do a lake placid blue metallic job on it.
Top of the page Bottom of the page
slodoug
Posted 2020-10-11 12:07 PM (#553018 - in reply to #552849)
Subject: Re: Applause refinish


Joined:
September 2020
Posts: 23

so update, the original finish was poly over a paint job and the wood is just plywood really. I tried 2 attempts at sealing it with vinyl sealer lacquer and got too many cracks. i'm going to do a light white poly wipe-on coat, then lacquer on top of that.
Top of the page Bottom of the page
Old Man Arthur
Posted 2020-10-11 5:24 PM (#553019 - in reply to #552849)
Subject: Re: Applause refinish



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR
You need to post play-by-play photos.
Top of the page Bottom of the page
slodoug
Posted 2020-10-12 2:25 PM (#553021 - in reply to #552849)
Subject: RE: Applause refinish


Joined:
September 2020
Posts: 23

cracks. applied too fast and too thick.



(ap6.jpg)



Attachments
----------------
Attachments ap6.jpg (49KB - 0 downloads)
Top of the page Bottom of the page
Love O Fair
Posted 2020-10-13 4:23 AM (#553025 - in reply to #552849)
Subject: Re: Applause refinish



Joined:
February 2016
Posts: 1768

Location: When??
Yep. Vibration is going to be pretty limited with that thickness. Could make for an 'interesting' sound though.
Top of the page Bottom of the page
slodoug
Posted 2020-10-13 1:05 PM (#553030 - in reply to #552849)
Subject: Re: Applause refinish


Joined:
September 2020
Posts: 23

i missed the part where they say not to do more than 1-2 coats of sealer. my current attempt is much lighter.
Top of the page Bottom of the page
slodoug
Posted 2020-10-13 2:29 PM (#553031 - in reply to #552849)
Subject: RE: Applause refinish


Joined:
September 2020
Posts: 23

latest



(ap7w2.jpg)



Attachments
----------------
Attachments ap7w2.jpg (79KB - 0 downloads)
Top of the page Bottom of the page
Love O Fair
Posted 2020-10-13 10:32 PM (#553033 - in reply to #552849)
Subject: Re: Applause refinish



Joined:
February 2016
Posts: 1768

Location: When??
So is this white just a sealer, or is it the final finish color, or are you still going for the metallic blue?
Top of the page Bottom of the page
slodoug
Posted 2020-10-14 10:40 AM (#553035 - in reply to #552849)
Subject: Re: Applause refinish


Joined:
September 2020
Posts: 23

thats just the sealer, 2 light coats. next up is sand to 400 then metallic blue.
Top of the page Bottom of the page
slodoug
Posted 2020-11-17 2:36 PM (#554277 - in reply to #552849)
Subject: RE: Applause refinish


Joined:
September 2020
Posts: 23

progress, im 5-6 coats past this now so building layers.. no cracks yet



Edited by slodoug 2020-11-17 2:38 PM
Top of the page Bottom of the page
Old Man Arthur
Posted 2020-11-17 2:51 PM (#554278 - in reply to #552849)
Subject: Re: Applause refinish



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR
Nice Rosette.
Top of the page Bottom of the page
slodoug
Posted 2020-11-22 4:49 PM (#554336 - in reply to #552849)
Subject: RE: Applause refinish


Joined:
September 2020
Posts: 23

update: still applying clear coats. I'm re-masking after every 2-3 coats. My next strategy is to smooth out the edges where it meets the plastic binding. Not sure that if I brush it there, it will alter the metallic look versus the spray on the rest of it. Maybe brush to build it up, then spray to finish after ultra fine masking it? Can I lacquer the binding or will it not stick? I was planning on either leaving the binding plain or having an artist friend use acrylic on it.

Top of the page Bottom of the page
Love O Fair
Posted 2020-11-24 11:18 PM (#554353 - in reply to #552849)
Subject: Re: Applause refinish



Joined:
February 2016
Posts: 1768

Location: When??
Looking much better than the pre-work photos, that's for sure. I am curious to know how it will eventually resonate with so many layers on it. And I agree with Arthur... nice rosette. It seems that brushing would be especially risky, even if sprayed afterward for the final. And, just my opinion, I think the white binding looks good with the blue.




Edited by Love O Fair 2020-11-24 11:37 PM
Top of the page Bottom of the page
slodoug
Posted 2020-12-07 8:53 PM (#554420 - in reply to #552849)
Subject: RE: Applause refinish


Joined:
September 2020
Posts: 23

latest
Top of the page Bottom of the page
slodoug
Posted 2020-12-23 10:39 PM (#554533 - in reply to #552849)
Subject: RE: Applause refinish


Joined:
September 2020
Posts: 23

final coat tonight. there were lots of runs and uneven coats it kind of lends itself to the "liquid metallic" look i was going for. I'll wait a month and then test it with strings, then decide whether or not to sand/buff, leave it, or make it a decoration.


Edited by slodoug 2020-12-23 10:40 PM
Top of the page Bottom of the page
DetlefMichel
Posted 2021-01-07 5:28 AM (#554696 - in reply to #552849)
Subject: Re: Applause refinish



Joined:
May 2011
Posts: 751

Location: Muenster/Germany
Looks very good, I guess live even better than on the photo.You managed a fine metallic-effect, classic Mercedes style. And if this would be mine I would also make a matching headstock, like on some old Statocasters. At least the tuner buttons.
Top of the page Bottom of the page
slodoug
Posted 2021-02-07 11:19 PM (#555077 - in reply to #552849)
Subject: RE: Applause refinish


Joined:
September 2020
Posts: 23

after sanding out some cracks and doing another blue coat and more clear, i think its done. waiting until march to string it.
Top of the page Bottom of the page
seesquare
Posted 2021-02-08 8:20 AM (#555078 - in reply to #552849)
Subject: Re: Applause refinish


Joined:
November 2002
Posts: 3598

Location: Pacific Northwest Inland Empire
Nice work. Developed some tendinitis in that elbow, yet?
Top of the page Bottom of the page
slodoug
Posted 2021-03-15 8:09 PM (#555315 - in reply to #552849)
Subject: RE: Applause refinish


Joined:
September 2020
Posts: 23

holding strings again with no issues. sounds great.



(apf.jpg)



Attachments
----------------
Attachments apf.jpg (57KB - 1 downloads)
Top of the page Bottom of the page
Old Man Arthur
Posted 2021-03-15 8:26 PM (#555316 - in reply to #552849)
Subject: Re: Applause refinish



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR


Nice.
Top of the page Bottom of the page
Jump to page : 1 2
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclubâ„¢ Copyright (c) 2001
free counters
(Delete all cookies set by this site)