|
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | I have somehow acquired a small collection of Viper Pups. I set out to measure the resistance of each one and came across something a little odd. Most of the pups had red/black leads and measured between 9.7 and 9.9 k ohms. One of the bridge pups had yellow/black leads and measured 2.5 k ohms. Was the one with the black/yellow leads used on a different flavor of viper such as the Viper 3?
I'm wondering whether I should use this one on a standard Viper - what would the difference be? |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | And for anyone who is interested - a whole lotta info on various pups:
PUP Measurements |
|
| |
|
Joined:
December 2003
Posts: 13996
Location: Upper Left USA | I think you might have grabbed half a split...
 |
|
| |
|
Joined:
January 2003
Posts: 1498
Location: San Bernardino, California | Viper III.
Neck = 10k
Middle = 5K
Bridge = 2.5k
Wish I had the listed Viper XII. |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | Thanks guys - that definitely answered the question.
So... I'll ask here and I'll post a thread in the For Sale section:
Does anyone have a middle pup for a Viper III that they would like to sell or trade? |
|
| |
Viper PUP Question(s)
