|
|
Joined:
June 2007
Posts: 4
| Hi all you ovation deacon (breadwinner)fans out there.
I purchased an ovation deacon 12string some weeks ago. I love it cause of its outstanding sound.
There is one thing that I have a problem with : it makes rattling noises at some string frequences. I already checked the tuners, battery case and all the switches. Can anyone give me advice by own exprience, what could be the reason for the rattling noise ?
Best Regards
Karl |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | Just keep working it till you track is down. Just like a rattle in a car.
They are nice guitars. |
|
| |
|
Joined:
October 2005
Posts: 4081
Location: Utah | I had a rattle in the pickup system on my electric. It was in the plastic frame around the pickup. Twisting the mounting screws and the pickup height adjustment screws (not the pole pieces within the pickup) a tad seemed to cure it.
It is also possible that it is a wire inside. Also, it could be buzzing on the nut or the saddle if the slots are messed up. |
|
| |
|
Joined:
June 2007
Posts: 4
| Hi FlySig,
if it's a wire inside, how then to loose the volume/treble knobs. There is no screw on the side of the knobs. Can they be pulled off without damaging anything ? Who is Jefferson ?
Best Regards
Karl |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | George Jefferson, he ran a dry cleaning business. He'd have a good answer for things. |
|
| |
|
Joined:
March 2002
Posts: 14842
Location: NJ | "Honky . . . ." |
|
| |
|
Joined:
January 2005
Posts: 45
Location: Santa Cruz, CA | Knuddel1,
My Breadwinner's metal backplate has a tendancy to come loose and rattle. It's an older version (plain metal, no insignias/writing) and the body's been stripped so it may sit looser than in a stock guitar.
-Joshua |
|
| |
ovation deacon 12string
